If you've just received your Starlink Gen 3 dish, you're probably wondering the best way to get it mounted securely. Whether you're installing it on a wall, roof, or pole, this guide walks you through everything you need to know for a clean, weatherproof Starlink Gen 3 installation in Australia.
Why Proper Mounting Matters
Starlink Gen 3 needs a clear view of the sky with minimal obstructions. A poorly mounted dish can lead to signal dropouts, physical damage from wind, and a messy cable run. Getting the mount right from the start saves you time, money, and frustration.
Choosing the Right Mount for Your Property
There are several mounting options depending on your property type:
- Wall Mount — Ideal for single-storey homes where the dish can be positioned high on an exterior wall with a clear northern sky view.
- House/Roof Mount — Best for two-storey homes or properties where maximum elevation is needed for an unobstructed view.
- Pole Mount Adaptor — Perfect for rural properties, farms, or anywhere you need to position the dish away from the building entirely.
What You'll Need
- Starlink Gen 3 dish and cable
- A Get Mounted Gen 3 bracket (wall, roof, or pole)
- Drill and appropriate masonry or timber bits
- Stainless steel screws and wall plugs
- Cable clips or conduit for a clean run
- A wall cover plate for the cable entry point
Step-by-Step Installation
- Choose your location — Find a spot with a clear view of the northern sky. Use the Starlink app's obstruction checker to confirm.
- Mark your drill points — Hold the mount bracket against the wall or roof and mark the fixing points with a pencil.
- Drill and fix the bracket — Drill your holes, insert wall plugs if needed, and secure the bracket firmly with stainless steel screws.
- Attach the dish — Slide the Starlink Gen 3 dish onto the mount and secure it according to the bracket instructions.
- Run the cable — Route the cable neatly using cable clips or conduit. Use a wall cover plate where the cable enters the building for a professional finish.
- Connect and configure — Plug in your router, open the Starlink app, and follow the setup prompts.
Tips for Australian Conditions
- Use stainless steel fixings to prevent rust in coastal or high-humidity areas.
- Seal any roof penetrations with appropriate flashing or silicone to prevent water ingress.
- In high-wind areas, opt for a pole or roof mount over a wall mount for added stability.
Shop Starlink Gen 3 Mounting Hardware
Get Mounted stocks a full range of Starlink Gen 3 mounting solutions designed and tested for Australian conditions. From wall mounts to pole adaptors, we've got everything you need for a clean, professional install. Shop the range here.